Flood waters not only damage structures, the water contains mud and bacteria that must be removed from clothing, shoes, and laundry equipment. Learn how to handle clothes, leather shoes, mildew problems, and laundry room equipment touched by flood waters.
How to Clean and Disinfect Washable Clothes
- -As soon as possible, sort soiled clothes into piles of washable and dry clean only fabrics.
- Sort washable clothes into whites and colored clothing. Do not leave wet colored clothes mixed with whites because dye transfer can occur.
- Using a hose, rinse as much mud as possible from the clothing. Do not put mud-covered clothing directly in the washer because the sludge can overwhelm the washer’s drainage system.
- Wash the clothes in the hottest water recommended for the fabric. To disinfect, for white cotton fabrics, add one cup of chlorine bleach in the wash cycle. For fabrics that cannot be washed with chlorine bleach (spandex, wool, silk, colored clothes), add one cup of pine oil disinfectant (Pine-Sol) or one cup of phenolic disinfectant (Lysol) to the wash cycle.
- After washing with disinfectant, inspect clothing for remaining stains. If stains remain, do not dry the clothing. Allow soiled clothing to soak overnight in a solution of oxygen-based bleach (brand names are: OxiClean, Nellie’s All Natural Oxygen Brightener, or OXO Brite) and then wash as usual with regular laundry detergent.
- Dry clothing in a dryer at the highest heat recommended for the clothing to help kill bacteria. White clothes can be hung outside in the sun where ultraviolet rays will help kill bacteria.
Dry Clean Only Clothes After a Flood
- After the dry clean only clothes have been sorted, inspect each one carefully. Some garments may need to be dry cleaned several times to remove stains and you should weigh the cost of multiple cleanings against the cost of the item. Replacement may be more cost-effective.
- If the clothing is heavily coated in mud, use a water hose to remove as much heavy soil as possible.
- Allow the clothing to air dry away from direct heat and sun. Do not leave wet clothes in a pile or place in plastic bags because mildew and mold will grow.
- As soon as possible, take the clothing to a professional dry cleaner. The dry cleaning process will disinfect the clothing and hopefully remove the stains. Be sure to tell the dry cleaner that the clothes have been in a flood.
Additional Tips to Clean Flood Damaged Clothes
- Do not sort wet, contaminated clothing on surfaces where bacteria can be spread. Disinfect every surface that comes in contact with the contaminated clothing.
- Do not store any wet clothing in plastic bags which encourages mildew growth and stains. If you cannot clean clothes immediately, spread out the dirty clothes and allow them to air dry individually before washing.
- If your washer has been contaminated with flood waters, it should be cleaned and disinfected following the instructions below before using. It should also be checked by a technician to be sure it is safe to use.
- If the soil in the flood waters is high in iron content, chlorine bleach can cause rust spots to appear on clothing. Separate treatment will be needed to remove the rust stains.
How to Clean and Restore Leather Shoes After a Flood
Water is not good for leather shoes, handbags, hats, and clothes and flood waters filled with mud and bacteria are even worse.
How to Clean and Restore Leather Shoes and Accessories
- Remove mud from leather while the mud is still wet. Do this as soon as possible by using a hose with running water. Try not to scrape away the mud with anything sharp or rough textured which can damage the leather
- Use a soft damp cloth to remove final bits of mud from stitching and intricate areas.
- Stuff shoes with tissue paper or paper towels to get them back into the proper shape. Newsprint can be used but there can be some transfer of ink to the insoles. Do not use shoe trees because they may overstretch the leather.
- Dry shoes at room temperature away from heaters and the sun. Excessive heat will harm the leather. A circulating fan can help speed the drying process by increasing air flow.
- After the shoes are dry, clean with saddle soap, condition with a leather conditioner, and polish with a good shoe polish or cream. Do not wear the shoes until they are thoroughly dry or they may become misshapen and even crack or rip.
- If mildew growth has already begun on the leather goods, follow these tips to remove mildew and save your shoes or clothes.
How to Disinfect a Washer and Dryer After a Flood
Washers and laundry rooms can be contaminated with bacteria after floods, a water main break, or even after washing contaminated clothes.
How to Disinfect a Washer
- Set the washer to the largest load capacity and fill with hot water.
- Add one cup chlorine bleach.
- -Set the washer to a full cycle with a hot water rinse. Allow the washer to run through the entire cycle.
- Clean the exterior of the washer and all other surfaces in the laundry room with a solution of chlorine bleach and hot water. Rinse with clean water.
Additional Maintenance Tips:
- If a washer has been through a flood, have a technician check the appliance before cleaning and using.
- If a dryer has been contaminated by flood water, have it checked by a technician and then wipe down the drum and outside of the dryer with a solution of chlorine bleach and hot water. Always rinse well with a cloth dipped in clear water before using.
How to Prevent and Remove Mildew in the Laundry Room
Even without a flood, laundry rooms offer the perfect climate for mold growth. Mold is destructive to the structure of your home and can jeopardize health. Taking steps to control humidity, frequent checks for the beginnings of mold growth, and quick clean-up can keep problems at bay.
Keeping humidity in the laundry room below fifty percent will deter mold growth, prevent your dryer from working harder, and make you feel more comfortable. Humidity can be reduced with a dehumidifier, an open window, a good ventilation system, or a ceiling fan. If you live in a high humidity climate and your laundry room has poor ventilation, use a semi-gloss paint for the walls and ceiling that has an anti-mold and mildew agent added.
Clothes should be removed from the washer immediately and hung on a clothesline or dried in the dryer. Wet clothes can actually mildew in the washer. If they are removed without treating the mildew, spores can spread and cause more problems. Water connections to the washer should be checked frequently for leaks. Even if you don’t see a leak, there could be hidden trouble. Using a dry hand or cloth, wipe around each connection to feel for dampness. A water leak will often cause walls to bubble or ripple. It can also cause mold to grow in the insulation behind the drywall. If you see a black or bluish stain on the wall, clean-up must begin immediately.
Washers,especially front-load models, can harbor mold and mildew spores. Frequent cleaning and leaving the door of the washer open after each cycle can help alleviate problems.
The build-up of dryer lint can also cause mold problems. Dryers should vent outside with an approved dryer vent. The vent should be checked frequently to ensure that it is securely attached to the dryer and is clear of lint. If you feel the transfer of air around the vent when the dryer is running, there are holes that are leaking moist air. Replace as soon as possible.
Removing the lint from the dryer filter after each use is essential to keeping your dryer operating properly and preventing fires. Lint can also build-up in the dryer hose and around the outside vent encouraging mold growth. If you notice a musty smell in your dryer, it is time to clean the venting thoroughly.
At the first noticeable sign of mildew or whiff of mustiness, use a scrub brush and a solution of water and chlorine bleach to wipe down surfaces. Be sure to wear a mask and gloves to protect yourself from airborne spores. When cleaning the laundry, use an antibacterial spray or cleaning product to prevent regrowth. If the mold has grown into the drywall or insulation, the area must be replaced to get rid of the mold infestation.